ANSI B16.34 Titanium Gr2/Gr7 PN16 Flange Ball Valve For Chemical And Power Industry (DN10-DN200)

Product Introduction

A flanged ball valve rated PN16 has to hold its sealing performance while the flange joint carries the pipe loads, and that is where a thin or poorly machined body shows up as leakage. This page covers ANSI B16.34 and B16.5 flanged valves in Gr2 and Gr7 titanium across the DN10 to DN200 size range for chemical and power plant lines.

Specification Table

Applications and Titanium Advantages

The valves isolate medium-pressure chemical piping and aggressive acid and alkali transfer lines in chemical works and power stations. Deformation of the flange connection under pipe stress, followed by leakage, is the failure that concerns plant engineers, so that the material documents for body standard, the pressure rating and the material grade should all be confirmed against the piping design.

• The valve body follows the ANSI B16.34 design requirement and the ANSI B16.5 flange standard, so it fits standard flanged piping.
• Gr2 and Gr7 options cover both general corrosive service and the chloride-bearing conditions where Grade 7 is more appropriate.
• A wide DN10 to DN200 range allows the same valve type to be used across a whole plant piping system.

Quality and Purchasing Information

Confirm the nominal size, pressure rating, flange standard and facing, material grade, seat material, medium, temperature, actuation method and quantity. Tibars reviews the valve against the piping class and confirms the grade recommendation for the specific chemistry before quoting.

• Confirm the required standard, dimensions, tolerances, quantity and delivery condition for this PN16 flange ball valve before the quotation is issued.
• Request the applicable material certificate, inspection records and drawing review so that the material documents for this PN16 flange ball valve match the project specification.
• For non-standard sizes or engineered versions of this PN16 flange ball valve, send a drawing and the service conditions so the supply scope can be reviewed.

Request a Quotation

Send the size, pressure rating, material grade, medium, seat preference and quantity, and Tibars will quote this ANSI B16.34 PN16 titanium flange ball valve with the applicable documents.