High-Flow Titanium 3-Way Ball Valves: Full Port Design for Complex Flow Control

Product Introduction

This full-port three-way titanium ball valve is supplied for plants that must divert, mix or split an aggressive stream without installing a station of several valves. The full-bore port keeps pressure drop low on the active path, while a titanium wetted body is intended for acid, alkali and seawater duty where carbon steel or standard stainless trim would need frequent replacement.

Specification Table

Applications and Titanium Advantages

Typical duty is three-way switching, blending and splitting on chemical, water-treatment and oil-and-gas circuits where one valve has to route flow in more than one direction. Titanium keeps the wetted parts chemically stable in these services, but the grade, seat material, pressure class and actuation must be selected together for the actual medium and cycling rate.

• A full-port three-way body can replace a combination of two or three standard valves, which reduces the number of leak paths in the line.
• Titanium wetted parts are selected for acid, alkali and seawater service once the grade has been verified against the medium composition and temperature.
• The sealing arrangement is stated to meet the ASME requirement applied to this design, and seat and trim materials are confirmed per duty.

Quality and Purchasing Information

Three-way valves of this type are built to the project duty rather than to one fixed catalogue specification, so that the material documents for medium, line size, operating pressure and temperature, actuation method and leakage class need to be stated before the design is frozen. Tibars reviews each enquiry against the stated ASME sealing requirement and the plant conditions, then returns a dimensioned offer.

• Confirm the required body material, dimensions, tolerances, quantity and delivery condition for this full-port three-way titanium ball valve before the quotation is issued.
• Request the applicable material certificate, inspection records and drawing review so that the material documents for this full-port three-way titanium ball valve match the project specification.
• For non-standard sizes or engineered versions of this full-port three-way titanium ball valve, send a drawing and the service conditions so the supply scope can be reviewed.

Request a Quotation

Send the medium, line size, pressure rating, temperature, actuation preference and quantity required, and Tibars will return a dimensional offer for this three-way titanium ball valve together with the applicable test documents.