Gr2 Titanium Elbow / Bends With 1.2mm For Exhaust Parts

Product Introduction

A 1.2 mm wall titanium elbow is a forming problem before it is a purchasing problem: bend it carelessly and the outer wall thins past the allowable limit while the inner wall wrinkles and restricts flow. This page covers Grade 2 elbows and bends produced by cold pushing and stamping for light-wall pipework and exhaust parts.

Specification Table

Applications and Titanium Advantages

The fittings turn light-wall industrial pure titanium pipework and make direction changes on corrosion-resistant fluid and exhaust lines. Wrinkling, excessive wall thinning and cracking at the bend are the defects to watch, so the bend radius, angle and the inspection that will be applied should all be stated in the enquiry.

• Cold pushing and stamping development keeps the wall thickness even around the bend instead of thinning the outside of the arc.
• Smooth internal transitions reduce flow resistance at the direction change.
• Grade 2 titanium suits the corrosive and elevated-temperature service found in exhaust and chemical pipework.

Quality and Purchasing Information

Confirm the outside diameter, wall thickness, bend angle and radius, end preparation, quantity and material grade, and state the inspection method that will be used. Tibars reviews the fitting against the forming route available and confirms the bend geometry and wall thinning before a firm price is issued.

• State the grade, size, tolerance, quantity and delivery condition of these thin-wall Grade 2 titanium elbows at enquiry stage so pricing can be issued without re-quoting.
• Ask for the mill test certificate and any inspection records that the project requires for these thin-wall Grade 2 titanium elbows, and confirm them against the purchase specification.
• Engineered or non-standard these thin-wall Grade 2 titanium elbows can be reviewed from a drawing together with the working medium and operating conditions.

Request a Quotation

Send the outside diameter, wall thickness, angle, radius, quantity and material grade, and Tibars will quote these Grade 2 titanium elbows and bends with the applicable formation records.