CNC machining of titanium alloy is difficult and takes a long time, which significantly increases the demand for cutting equipment and tools. Due to the small thermal conductivity, high chemical activity, small deformation coefficient and large elastic recovery characteristics of titanium alloy, it is difficult to process. In view of the material characteristics of titanium alloy, the cutting tool material of titanium alloy should have 1) high hardness and high strength and toughness; 2) Good wear resistance; 3) The material has low affinity with titanium element, and does not melt and diffuse with titanium alloy material; 4) Good thermal shock resistance. At present, the tool materials suitable for and widely used in the processing of titanium alloy are mainly tungsten drill cemented carbide, and polycrystalline cubic boron nitride (PCBN) and polycrystalline diamond (PCD) and other superhard tool materials, of which PCBN and PCD and other superhard tool materials can achieve high-speed, high-precision and high-stability processing of titanium alloy materials. According to Aibang polymer data, the overall yield of titanium alloy mobile phone frame is about 30%-40%, which is far lower than 80% of aluminum alloy frame. With the gradual increase in the permeability of titanium alloy materials in the field of consumer electronics, due to the difficulty of titanium alloy processing and long processing time, the demand for cutting equipment and tools is expected to increase significantly.
3D printing can solve the traditional processing problems of titanium alloys. 3D printing through the process of layer-by-layer printing, the finished blank has been very close. Close to the shape and size of the final product, so only after finishing and surface treatment steps, effectively solve the problem of serious tool loss and low processing efficiency encountered in titanium alloy material reduction processing, while ensuring a high processing yield and material utilization, in the complex structure of small and medium-sized parts processing production has significant advantages. The rapid decline in costs is expected to be applied on a large scale in the field of consumer electronics, driving up the demand for 3D printing equipment. 3D printing has a high production cost and has been considered economically inefficient in large-scale production in the past, so it is mainly used in high value-added fields such as aerospace, and is usually used for prototype trial production or customized small batch production in civil industry. With the continuous progress of technology, the prices of powder, raw materials and 3D printing equipment have declined recently, the cost of 3D printing has continued to decline, and the 3D printing process titanium alloy parts have been applied in the 3C field for the first time.





