In terms of civil airliners, the amount of titanium used by dual-channel aircraft is much higher than that of single-channel aircraft, such as Boeing's Boeing 737, 747, 777 titanium consumption is 18t, 45t and 59t, respectively, while the amount of titanium used by Boeing 787 aircraft reaches 136t, accounting for 15% of the total aircraft mass, and the proportion of titanium used has increased significantly.
Airbus is also so an A320, A330 and A340 with titanium amounts of 12t, 18t and 25t, and the A380 model uses a full titanium pylon, the total amount of titanium used to reach 146t, accounting for 9% of the total aircraft mass, compared with 6% of the A320 has a significant increase.
Boeing 777 as a typical representative of Boeing aircraft, developed in the early 1990s, its extensive use of the mid-1980s to the late 1980s to develop new materials, including the new 7000 and 2000 series aluminum alloy, damage tolerance of composite materials and advanced titanium alloys. The use of these materials has reduced the weight of the aircraft by 2,630 kg. A major feature of Boeing aircraft titanium is the extensive use of beta titanium alloy: titanium in the Boeing series of aircraft on the increase year by year, Boeing 747 titanium consumption accounted for 4%, 757/767 accounted for 6%, in the Boeing 777 consumption of 9%, is currently the world's main passenger aircraft in the titanium alloy consumption of the largest type of aircraft. Beta titanium alloy has a long development history since the 1960s, the early typical beta titanium alloy Ti-120 has good weight reduction and corrosion resistance, and is widely used in military SR-71 reconnaissance aircraft, but the application of beta titanium alloy in civil aircraft is slower. At the same time, as a representative of Airbus and the most advanced civil large passenger aircraft, Airbus A380, its landing gear is made of Ti-10-2-3 alloy, with a maximum weight of 3200kg.
With the accumulation of titanium material technology in China and the technology accumulation in the field of commercial trunk airliners in recent years, the titanium alloy consumption of COMAC C919 has reached 9.3%, and the titanium alloy consumption of regional airliner ARJ21 has reached 4.8%, which is at a high level. With the accelerated delivery of the future C919, the high-end titanium alloy ceiling of China's civil aviation is further opened.





