Titanium Plate: Premium Material for Industrial & Medical Applications

Product Introduction

Heavy-gauge titanium plate is bought for the parts of a vessel where thickness is set by pressure, corrosion allowance or stiffness, and where the interior of the material has to be sound before it is cut. This page is aimed at vessel fabricators, desalination contractors and process plant builders who need a large plate with documented internal inspection rather than a thin commercial sheet.

Specification Table

Applications and Titanium Advantages

The plate goes into thick-walled pressure vessels, large heat exchanger tubesheets and reactor bases, where inclusions, porosity or laps in the interior would only be found after a costly machining operation. Thick titanium plate is a difficult product to buy well, so internal ultrasonic coverage and flatness both belong in the enquiry rather than being left to delivery.

• Heavy plate is offered from large-format stock, so a big tubesheet or vessel wall can be cut from one piece instead of being welded up from smaller plates.
• Internal ultrasonic inspection coverage addresses the inclusion and shrinkage-cavity risk that matters most in thick titanium.
• Machining allowance and flatness can be discussed at enquiry stage so the plate arrives ready for the fabricator.

Quality and Purchasing Information

Confirm the grade, thickness, width, length, flatness requirement, machining allowance, quantity and the ultrasonic inspection level before the plate is cut. Tibars reviews the requirement against the heavy plate intended for the order and can state which dimensions are held in stock and which have to be produced, so that the delivery programme is realistic.

• For this heavy titanium plate, fix the grade, dimensions, tolerance class, order quantity and delivery point before the order is placed.
• Material certification, dimensional records and third-party inspection can be arranged for this heavy titanium plate when the requirement is stated in the enquiry.
• Where this heavy titanium plate must be produced to a drawing, share the drawing, mating parts and service conditions so manufacturability can be confirmed.

Request a Quotation

Send the grade, thickness, width, length, quantity and inspection requirement, and Tibars will quote this heavy titanium plate with the applicable material and inspection documents.