CP Grade 1 Titanium Bar

Product Introduction

Commercially pure Grade 1 titanium bar to ASTM B348 is the softest and most formable of the unalloyed titanium grades, and it is the usual choice when a part has to be deep drawn, bent or cold worked rather than simply machined. Purchasing departments use this page when they need to separate a genuinely low-interstitial Grade 1 bar from a general-purpose titanium rod offer.

Specification Table

Applications and Titanium Advantages

The material is used for reactor linings, deep-drawn shells, high-ductility cold-formed structural parts, gaskets and corrosion-resistant fittings where the forming operation is the limiting step. Low iron and oxygen levels are what keep Grade 1 ductile, so the buyer should confirm that the delivered bar meets ASTM B348 chemistry rather than assuming that any CP titanium will form without cracking.

• Grade 1 offers the highest formability of the commercially pure grades, which suits deep drawing and tight-radius bending.
• Controlled interstitial levels reduce the cracking risk that appears when higher-grade titanium is cold formed beyond its limit.
• ASTM B348 framing keeps chemistry, mechanical properties and dimensional tolerances on a documented footing for incoming inspection.
• A visible coil, straight or cut-length supply format can be matched to the machining or forming process in use.

Quality and Purchasing Information

Before ordering, confirm the required diameter or section, length, tolerance, surface condition and delivery state, and state whether the bar will be machined or cold formed. Tibars can review the ASTM B348 certificate and mechanical test data against the purchase specification so that ductility assumptions are supported by documents.

• State the grade, size, tolerance, quantity and delivery condition of this CP Grade 1 titanium bar at enquiry stage so pricing can be issued without re-quoting.
• Ask for the mill test certificate and any inspection records that the project requires for this CP Grade 1 titanium bar, and confirm them against the purchase specification.
• Engineered or non-standard this CP Grade 1 titanium bar can be reviewed from a drawing together with the working medium and operating conditions.

Request a Quotation

Send the diameter, length, quantity, forming or machining operation and delivery destination, and Tibars will quote this Grade 1 titanium bar with the applicable ASTM B348 material certificate.