Titanium CNC Turning Parts High Purity Titanium Sputtering Target

Titanium CNC Turning Parts High Purity Titanium Sputtering Target

Product name: High purity titanium sputtering targets
Purity 99.5%, 99.95%, 99.98%, 99.995%.
Material: pure titanium titanium alloy and others
Technique:Forging, CNC machined
Send Inquiry
Product Introduction

We uphold the concept of providing customers with value-added services. What is sold is not just a single product, but a excellent titanium pipe for bike frame, Titanium Spring Washer, ASTM B381 Titanium Forging Ring solution for customers, which brings real value enhancement to customers. Whether the enterprise will expand and continue to manage, the key factors are how to use the organization, the management, and the talented person to link customer's demand. A long-term development strategy and team building plan have been established since our establishment.

High Purity Titanium Sputtering Targets

1. Core Innovation: Redefining Purity & Performance​

  • Product Name: Ultra-High-Purity Titanium Sputtering Targets (Gr1-Gr12 Grades)
  • Purity Benchmark:
  • Titanium Content: ≥99.95% (ASTM B348)
  • Impurity Control: <0.02% (O, N, C ≤0.005%; Fe ≤0.01%)
  • Density: 4.51 g/cm³ (±0.02)
  • Why This Matters:
  • Film Integrity: Sub-ppm impurity levels eliminate voids and inclusions, ensuring uniform film thickness (±2%) and adhesion strength (peel test >50 MPa).
  • Grain Structure: 50–100 μm equiaxed grains (SEM-verified) reduce arcing and improve sputtering rate stability by 30% .
  • Technical Edge:
  • Vacuum Induction Melting: 99.999% purity feedstock melted under 10⁻³ Pa vacuum.
  • Hot Isostatic Pressing (HIP): 1,200°C/200 MPa treatment to close pores <5 μm.
  • CNC Precision Machining: Tolerances ±0.05 mm for critical dimensions (e.g., target thickness).

 

2. Application-Specific Solutions​

2.1 Semiconductor Manufacturing​

Wafer Coating: Gr1 (99.5% Ti) targets for gate dielectric layers (oxide/nitride interfaces).

Case Study: Reduced particulate contamination by 80% in 300mm wafer sputtering.

2.2 Optical Coatings​

Anti-Reflective Films: Gr5 (Ti-6Al-4V) targets for UV/IR optics (refractive index control: n=2.2–2.6).

UV-C Lenses: Achieves 99.8% transmission in 200–400 nm range.

2.3 Energy Storage​

Solid-State Batteries: Gr7 (Ti-0.2Pd) targets for solid-electrolyte interfaces (ionic conductivity: 10⁻³ S/cm).

2.4 Advanced Electronics​

Flexible Circuits: Gr12 (Ti-0.3Mo-0.8Ni) targets for stretchable conductor lines (strain tolerance: 300%).


 

3. Quality Assurance & Compliance​

Certifications:

  • ISO 9001: Full traceability from raw material to finished product.
  • ASTM B381: Hydrogen embrittlement resistance <200 kPa.
  • RoHS/REACH: <100 ppm restricted substances.

 

Testing Protocols:

Test Method

Parameter

Specification

GDMS

Impurity Profiling

<0.02% total

SEM/EDS

Grain Morphology

Equiaxed, <100 μm

XRD

Phase Composition

>99% α-Ti

Hydrogen Test

H₂ Content

<2 ppm (ASTM E1447)


 

titanium sputtering targets42

 

Since our establishment, we have adhered to the road of technological innovation, continuously committed to the research and development of Titanium CNC Turning Parts High Purity Titanium Sputtering Target, and invested a lot of money in technology, equipment and modern management. Our factory adheres to the corporate tenet of 'customer needs as the center, unlimited service' and the corporate philosophy of 'integrity and win-win, repaying the society'. After years of continuous pioneering and enterprising, we continue to meet customer needs and are well received by customers. Our rigorous industrial chain structure, complete management system, advanced technology and equipment, high-quality products, and efficient service have won wide acclaim from customers in domestic and foreign markets.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry