OEM Carbon Steel Stainless Steel Fitting 90 Degree Bend Welded Butt-Welded Pipe Elbows

OEM Carbon Steel Stainless Steel Fitting 90 Degree Bend Welded Butt-Welded Pipe Elbows

Product Name: Titanium Bends
Standard: ASME B16.9
Material: Gr1, Gr2, Gr7, Gr12
Unit Price: $10usd/pc-$200usd/pc
Outer Diameter: 1/2"-48"
Wall Thickness: Sch5s-Sch160s
Technique: Seamless/Welded
Send Inquiry
Product Introduction

We are a technology-oriented large-scale titanium wire for jewelry grade 1, Titanium Bar Stock For Sale, Titanium Rod Grade 5 company integrating R&D, operation and service. The market is always changing rapidly, we should seize the opportunity, strive hard and achieve ourselves. Our products are very popular in the world market. If you order in large quantities, we can give you a discount. We try to establish the image of 'advancing with the market', win the trust of quality and customer first and make progress together with customers.

Product Introduction

A 90 degree elbow turns the flow through a right angle, and how it was formed decides the wall thickness on the back of the bend and the smoothness of the inside surface. This page covers elbows produced by mandrel pushing or die pressing, aimed at piping contractors and chemical fluid system integrators.

Specification Table

Item Confirmed information
Product type 90 degree elbow
Forming route Mandrel pushing or die pressing as stated
Material Titanium, grade to be confirmed with quotation
Standard Confirm with quotation
Outside diameter Confirm with quotation
Wall thickness Confirm with quotation
Bend radius Confirm with quotation
Surface condition Confirm with quotation

Applications and Titanium Advantages

The fittings change direction on 90 degree pipe runs and form part of high-pressure corrosive piping networks. Severe thinning on the back of the bend and internal wrinkling that raises flow resistance are the defects to check, so the bend radius, wall thickness and inspection method should all be agreed in the enquiry.

  • Mandrel pushing and die pressing keep the wall thickness even around the bend rather than thinning the back of the arc.
  • The internal surface stays smooth after forming, which keeps flow resistance low.
  • Elbows are produced in the diameter and wall thickness matching the pipe they connect to.

Quality and Purchasing Information

Confirm the outside diameter, wall thickness, bend radius, material grade, end preparation, quantity and required inspection. Tibars reviews the elbow against the forming route and the piping specification and confirms the dimensional and wall-thinning acceptance points before quoting.

  • Clarify the grade, size, tolerance, quantity and delivery schedule required for this 90 degree titanium elbow so the quotation reflects the actual scope.
  • Confirm which certificates, test reports and inspection documents are needed for this 90 degree titanium elbow and they will be matched to the order specification.
  • Custom dimensions, finishes or assemblies for this 90 degree titanium elbow are quoted after the drawing and operating conditions have been reviewed.

Request a Quotation

Send the outside diameter, wall thickness, bend radius, material grade and quantity, and Tibars will quote these 90 degree titanium elbows with the applicable documents.

We have always been committed to building a well-known brand in the industry and providing customers with high-quality OEM Carbon Steel Stainless Steel Fitting 90 Degree Bend Welded Butt-Welded Pipe Elbows. And now sincerely hope to promote partner friendship with you from all over the world. In recent years, with the company's honest and trustworthy, good business style and reliable product quality, we are widely recognized by users from all walks of life at home and abroad.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry