M15m/B150h Titanium Plate Heat Exchanger, Phe, Heat Exchanger

M15m/B150h Titanium Plate Heat Exchanger, Phe, Heat Exchanger

Product name: titanium plate heat exchanger
Plate Material:Gr1 Gr2 titanium
Suitable fluid: sea water, salt water Standard:ASME
Send Inquiry
Product Introduction

Since the establishment, our company has been committed to the development and production of thin titanium sheet, titanium sheet price, Titanium 6al-4v Bar, always maintaining unconventional development ideas, and winning the appreciation and trust of customers with excellent quality and perfect service. We constantly introduce new products, develop new channels, integrate new resources to meet the differentiated needs of different levels of customers, maintain the vitality of the enterprise and promote the rapid development of the enterprise development. Qualified product quality is our highest pursuit, and user satisfaction with products is our ultimate goal. We sincerely hope for your presence and guidance. Our strength is dedicated to meet the needs of the healthy development of society, create social resource value and corporate brand value, and provide a platform for sustainable development for the society!

Gasket material

Operating temperature

Suitable fluid

NBR

-15 to +130 ℃

water, sea water, salt water, mineral oil

Frame material

Interface material

 

stainless steel

titanium

 

 

 

Working principle:

The plate heat exchanger is composed of a set of corrugated metal plates with four corner holes for the two liquids to pass through. The metal plates are installed in a frame with a fixed plate and a movable compression plate on the side, and are clamped by clamping bolts. The plate is equipped with a sealing gasket to seal the fluid channel and guide the fluid to alternately flow into the respective channels to form heat exchange. The fluid flow rate, physical properties, pressure drop and temperature difference determine the number and size of the plates. The corrugation of the plate not only increases the degree of turbulence and forms many supporting points, which are sufficient to withstand the pressure difference between the media. The metal plate and the movable compression plate are suspended on the upper guide rod and positioned by the lower guide rod, while the rod end is fixed on the support On the column, but if one of the liquids or two liquids passes through the heat exchanger more than once, the interface should be opened on the fixed plate and the movable pressing plate. In most cases, single-pass is used, and all pipes are connected to the fixed pressing plate. On top, check that the shoes are removed to open the heat exchanger, and there is no need to remove the pipeline.

Titanium plate heat exchanger

 

 

Advanced panel structure:

Compared with other heat exchangers, the detachable gasket heat exchanger has a compact structure; it can conduct heat exchange at a temperature difference of 0.5-1℃, with a design up to 30Bar, and a processing capacity of 4500m3/h; improved plate guide Flow design can effectively prevent plate fouling and increase the heat transfer coefficient up to 8000w/m2.k.

 

Variety of working conditions:

Abundant plate types, various angles, various groove depths, and different combinations form a suitable heat exchanger that is more suitable for working conditions, plate positioning system and unilateral flow design, and special clamping size identification. Easy to install and take over, operation and maintenance. Heat exchangers of different materials are available, such as stainless steel. Plates made of titanium or other special alloys to meet different industrial needs. Thermal mixing form. By changing the flow mode or increasing the number of flow channels, countless combinations can be achieved, from a single counter-flow mode of two fluids to a multi-process flow mode of three or more fluids. It provides designers with reasonable choices to meet the needs of different working conditions.

 

Visible economic benefits:

The plates are uniformly formed, using high-precision molds. Reduce the physical stress of the plate and improve the balance of the plate, which greatly extends the service life of the plate; the plate is easy to approach and check, and is convenient for manual cleaning. In many occasions, it can be cleaned by countercurrent flushing. Daily cleaning does not take too much time and does not require special training personnel; all series adopt the form of sticking-free, reducing operation and maintenance costs and convenient maintenance. The heat transfer and pressure can be adjusted. The heat transfer coefficient and pressure drop can be adjusted through the combination of plates to obtain a good heat transfer coefficient, thereby reducing equipment investment; economical, due to its high heat transfer coefficient, easy installation and maintenance, making the initial stage Investment and operation and maintenance costs are greatly reduced.

Titanium plate heat exchanger 1

 

Compliant standards:

American ASME Standard

Italian Racolta M specification

Swedish Pressure Vessel

Australian Pressure Vessel

Japan JIS and other standards

China Pressure Vessel Standard Specification, etc.

API American Petroleum Institute

BV French Register of Shipping

CCS China Classification Society certification

 

About us:

Baoji Lihua Non-ferrous Metals Co., Ltd is specialize in producing and selling titanium products. We hold advanced technology and equipment. We adopt good raw materials and establish integrated system of quality control to ensure the high quality of our products.

 

Our main items are as below: Titanium plate/sheet, titanium bar/rod ,titanium wire, titanium tube/pipe, titanium forging products,titanium heat exchanger, titanium baskets and so on, according to DIN,ANSI,BSW, and ISO standard. The products are widely used in various industries, such as aerospace, motorcycles, farming machines,construction,t ransportation, electric power,electronics,machinery,chemical,household electrical appliance,military,etc.

 

Baoji Lihua Non-ferrous Metals Co., Ltd was certificated by ISO 9001:2015 certificate .And many of our titanium products passed the third party inspections, such as SGS,TUV,BV etc.With its high qualty andscientific mangement and high effciency term the spirit of continuous innovation, Hamil metals Co.,Ltd willing to be your best partener.

Machines

FAQlihua titanium rod (1)

The key to our success is 'Good Product Quality, Reasonable Price and Efficient Service' for M15m/B150h Titanium Plate Heat Exchanger, Phe, Heat Exchanger. Great high quality, competitive rates, prompt delivery and dependable assistance are guaranteed Kindly allow us to know your quantity requirement under each size category so that we can easily inform you accordingly. Our company is facing new challenges with a brand new face and striving attitude, so as to produce better and newer products and better service to serve customers all over the world.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry