
Gr1, 90 Degree Titanium Elbow in Stock
Standard: ASME B16.9
Material: Gr1, Gr2, Gr7, Gr12
Unit Price: $10usd/pc-$200usd/pc
Outer Diameter: 1/2"-48"
Wall Thickness: Sch5s-Sch160s
Technique: Seamless/Welded
Looking forward to the future, we will continue to develop and innovate, providing you with cost-effective Titanium Wire Spool, Titanium Grade 12 Pipe, Titanium Target Sputtering. We are willing to be your most intimate and trustworthy partner! Adhering to the tenet of 'Quality for development, reputation for brand', we strive to build the corporate philosophy of 'professional production, professional service', continuously improve product quality, enhance brand image, and give back to the old and new with high-quality products and first-class service. With extremely experienced staff and technology, we can offer an excellent level of quality, service and reliability in a very short lead-time and at low cost. We are constantly improving the quality and quality awareness of all our employees, so that each employee takes responsibility and accountability for the quality of his or her work.
Product Introduction
A 90 degree elbow turns the flow through a right angle, and how it was formed decides the wall thickness on the back of the bend and the smoothness of the inside surface. This page covers elbows produced by mandrel pushing or die pressing, aimed at piping contractors and chemical fluid system integrators.
Specification Table
| Item | Confirmed information |
|---|---|
| Product type | 90 degree elbow |
| Forming route | Mandrel pushing or die pressing as stated |
| Material | Titanium, grade to be confirmed with quotation |
| Standard | Confirm with quotation |
| Outside diameter | Confirm with quotation |
| Wall thickness | Confirm with quotation |
| Bend radius | Confirm with quotation |
| Surface condition | Confirm with quotation |
Applications and Titanium Advantages
The fittings change direction on 90 degree pipe runs and form part of high-pressure corrosive piping networks. Severe thinning on the back of the bend and internal wrinkling that raises flow resistance are the defects to check, so the bend radius, wall thickness and inspection method should all be agreed in the enquiry.
- Mandrel pushing and die pressing keep the wall thickness even around the bend rather than thinning the back of the arc.
- The internal surface stays smooth after forming, which keeps flow resistance low.
- Elbows are produced in the diameter and wall thickness matching the pipe they connect to.
Quality and Purchasing Information
Confirm the outside diameter, wall thickness, bend radius, material grade, end preparation, quantity and required inspection. Tibars reviews the elbow against the forming route and the piping specification and confirms the dimensional and wall-thinning acceptance points before quoting.
- Clarify the grade, size, tolerance, quantity and delivery schedule required for this 90 degree titanium elbow so the quotation reflects the actual scope.
- Confirm which certificates, test reports and inspection documents are needed for this 90 degree titanium elbow and they will be matched to the order specification.
- Custom dimensions, finishes or assemblies for this 90 degree titanium elbow are quoted after the drawing and operating conditions have been reviewed.
Request a Quotation
Send the outside diameter, wall thickness, bend radius, material grade and quantity, and Tibars will quote these 90 degree titanium elbows with the applicable documents.
Our company's strict production management and excellent product quality are favored by customers, our orders are in an endless stream and our Gr1, 90 Degree Titanium Elbow in Stock sold all over the world. Since our establishment, we keep on improving our products and customer service. We deeply know that the foundation of the brand's longevity lies in responsibility, the pursuit of quality, and the care for time and natural resources.
You Might Also Like
Send Inquiry





