
DIN 2605 Titanium Seamless 90 Degree Welded Elbow Tube Fittings
Standard: ASME B16.9
Material: Gr1, Gr2, Gr7, Gr12
Unit Price: $10usd/pc-$200usd/pc
Outer Diameter: 1/2"-48"
Wall Thickness: Sch5s-Sch160s
Technique: Seamless/Welded
We are able to assure you product or service quality and aggressive cost for titanium conflact flanges, Titanium Blind Flange, 8mm titanium sheet. In the future, we will continue to work hard, providing safe and convenient high-quality services to customers around the world. We strongly realize that the construction of corporate culture and workforce is essential in order to stand out from the competition.
Product Introduction
A 90 degree elbow turns the flow through a right angle, and how it was formed decides the wall thickness on the back of the bend and the smoothness of the inside surface. This page covers elbows produced by mandrel pushing or die pressing, aimed at piping contractors and chemical fluid system integrators.
Specification Table
| Item | Confirmed information |
|---|---|
| Product type | 90 degree elbow |
| Forming route | Mandrel pushing or die pressing as stated |
| Material | Titanium, grade to be confirmed with quotation |
| Standard | Confirm with quotation |
| Outside diameter | Confirm with quotation |
| Wall thickness | Confirm with quotation |
| Bend radius | Confirm with quotation |
| Surface condition | Confirm with quotation |
Applications and Titanium Advantages
The fittings change direction on 90 degree pipe runs and form part of high-pressure corrosive piping networks. Severe thinning on the back of the bend and internal wrinkling that raises flow resistance are the defects to check, so the bend radius, wall thickness and inspection method should all be agreed in the enquiry.
- Mandrel pushing and die pressing keep the wall thickness even around the bend rather than thinning the back of the arc.
- The internal surface stays smooth after forming, which keeps flow resistance low.
- Elbows are produced in the diameter and wall thickness matching the pipe they connect to.
Quality and Purchasing Information
Confirm the outside diameter, wall thickness, bend radius, material grade, end preparation, quantity and required inspection. Tibars reviews the elbow against the forming route and the piping specification and confirms the dimensional and wall-thinning acceptance points before quoting.
- Clarify the grade, size, tolerance, quantity and delivery schedule required for this 90 degree titanium elbow so the quotation reflects the actual scope.
- Confirm which certificates, test reports and inspection documents are needed for this 90 degree titanium elbow and they will be matched to the order specification.
- Custom dimensions, finishes or assemblies for this 90 degree titanium elbow are quoted after the drawing and operating conditions have been reviewed.
Request a Quotation
Send the outside diameter, wall thickness, bend radius, material grade and quantity, and Tibars will quote these 90 degree titanium elbows with the applicable documents.
Our company adheres to the 'customer first, product first' business philosophy, adhere to the principle of customer first to provide customers with quality services and high cost-effective DIN 2605 Titanium Seamless 90 Degree Welded Elbow Tube Fittings. We abide by the corporate philosophy of "integrity-based, pursuit of excellence", and "innovative and pragmatic" enterprise spirit. Due to our responsibility, we have mission-like passion, a healthy body, and standardized management, paving the way for the healthy and quick development of the company.
You Might Also Like
Send Inquiry







